How To Hem Pants By Hand?

How To Hem Pants By Hand?

When it comes to hemming pants by hand, there is a certain sense of accomplishment that comes with doing it yourself. Not only does it allow you to save money by avoiding costly alterations, but it also gives you the freedom to customize the length of your pants to perfectly suit your style and preference. So, how can you achieve a professional-looking hem without the help of a sewing machine? Let's uncover the secrets of mastering the art of hand hemming.

Before diving into the technique of hand hemming, it's essential to understand the basics of this timeless practice. Hemming pants by hand has been a common sewing technique for centuries, dating back to the early days of garment-making. In fact, people have been hemming their clothes by hand long before sewing machines even existed. This method allows for precision and control, ensuring a clean and neat finish. So, whether you're a sewing novice or an experienced tailor, learning how to hem pants by hand is a skill worth acquiring.



How To Hem Pants By Hand?

Tools and Supplies Needed for Hemming Pants

Before you start hemming your pants by hand, it's important to gather the necessary tools and supplies. Here are a few things you'll need:

  • Needle
  • Thread
  • Pins
  • Scissors
  • Measuring tape
  • Iron

Step 1: Measure and Mark

The first step in hemming your pants is to measure and mark the desired length. Put on the pants and fold the excess fabric up to the desired length. Use pins or fabric chalk to mark the hemline. Make sure the pants are even on both sides.

Alternatively, you can measure the desired length while the pants are off. Use a measuring tape to measure from the bottom of the pants to the desired hemline. Make sure to add an extra inch for the hem allowance.

Once you have marked the hemline, take off the pants and lay them flat on a surface. Use a ruler or measuring tape to ensure the markings are straight and even.

Tip: You may want to try on the pants with the marked hemline before proceeding to ensure the length is perfect.

Step 2: Prepare the Pants

Before sewing the hem, it's important to prepare the pants. Start by pressing the fold using an iron on a low heat setting. This will create a crisp and sharp crease, making it easier to sew.

If the pants have a lining, pin it up and away from the bottom edge so that it doesn't get caught while sewing.

If the pants are made of a fabric that frays easily, you may want to finish the raw edge by folding it under twice and hemming it with a machine or hand stitches.

Step 3: Start Hemming

Thread the needle with a thread that closely matches the color of your pants. Tie a knot at the end of the thread.

Starting from the inside of the pants, insert the needle into the fold of the fabric, about 1/4 inch away from the edge. Then, bring the needle up and insert it back into the fabric, creating small even stitches.

Continue stitching around the entire hemline, keeping your stitches even and close together. If you prefer a more invisible hem, you can use a blind stitch or hemming stitch.

Tips for Hemming Different Types of Pants

Hemming pants may vary depending on their style and fabric. Here are a few tips for hemming different types of pants:

Jeans or Denim Pants

When hemming jeans or denim pants, you may want to use a heavy-duty thread or even consider using a sewing machine. Jeans often have thick hems, so it may be challenging to sew them by hand.

Consider using a denim needle or a heavy-duty needle to sew through the layers of fabric. You can also use a hammer to pound the hemline flat, making it easier to sew through.

Dress Pants or Trousers

When hemming dress pants or trousers, you may choose to create a blind hem to keep the stitches less visible. A blind hem stitch requires folding the fabric a specific way and using a special blind hem stitch on your sewing machine, or you can sew it by hand using tiny catch stitches.

Additionally, dress pants or trousers often have a cuff at the bottom. To create a cuff, fold the fabric up twice—first to the desired length, then fold again to create the cuff. Sew around the bottom edge of the cuff to secure it.

Step 4: Finishing the Hem

Once you've sewn around the entire hemline, tie off the thread and cut the excess. Give the hem a final press with an iron to ensure it lies flat and looks neat.

Try on the pants to make sure the hem length is perfect, and make any necessary adjustments before fully completing the hem.

Now you have successfully hemmed your pants by hand! With practice, you will become more confident and skilled at achieving professional-looking hems.


How To Hem Pants By Hand?

Hemming Pants By Hand: A Step-by-Step Guide

When it comes to hemming pants by hand, a professional touch can make all the difference. Whether you're a tailor or simply need to make adjustments to your own pants, mastering this skill is essential. Follow these steps for a flawless finish:

Materials Needed

  • Needle
  • Thread
  • Pins
  • Measuring tape
  • Scissors
  • Iron

Step 1: Measure and Mark

Start by putting on the pants and folding the excess fabric up to the desired length. Use a measuring tape to ensure symmetrical measurements on both legs. Mark the desired length with pins.

Step 2: Remove the Excess Fabric

Removing the excess fabric, cut along the marked line using sharp scissors. Remember to leave a small allowance for the hem.

Step 3: Create the Hem

Fold the raw edge of the fabric inwards, creating a neat and even hemline. Use pins to secure it in place.

Step 4: Hemming Stitch

Thread your needle and tie a knot at the end. Starting at the back of the fabric, insert the needle and pull it through. Repeat this whip

Key Takeaways - How To Hem Pants By Hand?

  • Measure and mark the desired length for your pants hem.
  • Turn the pants inside out and fold the fabric up to the marked length.
  • Pin the folded fabric in place, ensuring it is even and straight.
  • Thread a needle with matching thread and knot the end.
  • Sew a simple running stitch along the folded fabric, starting from the inside seam.

Frequently Asked Questions

When it comes to hemming pants by hand, many people have questions about the process and best practices. Here are some frequently asked questions and their answers:

1. How do I measure the correct length for hemming?

To measure the correct length for hemming your pants, you'll need a measuring tape. Start by putting on the pants and folding the excess fabric inside, creating a temporary hem. Stand straight and hold the measuring tape at the desired length, typically at the bottom of the ankle. Mark this length with a pin. Take off the pants and measure the distance between the pin and the original hem. This will be the amount you need to fold and sew to create the new hem.

Remember to take into account the type of shoes you'll wear with the pants. For dress pants, it's common to have a slight break where the pants touch the top of the shoe, while for casual pants, you may prefer a no-break or minimal break length.

2. What type of stitch should I use for hemming pants by hand?

For hemming pants by hand, the blind stitch or slip stitch is commonly used. This stitch creates a nearly invisible seam from the outside and ensures the hem stays in place. To do a blind stitch, bring the needle up through the folded edge of the fabric, catch a small amount of fabric from the pant leg, and then insert the needle back into the folded edge. Repeat this process along the length of the hem, making sure the stitches are close together but not too tight to allow for flexibility.

Alternatively, you can also use a whipstitch or even a simple straight stitch if you prefer a more visible seam. The choice of stitch depends on your personal preference and the style of the pants.

3. What type of thread should I use for hemming pants?

When hemming pants by hand, it's best to use a strong and durable thread that matches the color of the pants. Polyester or cotton threads are commonly used for this purpose. Choose a thread that is suitable for the fabric of your pants and will withstand regular wear and washing.

It's also important to select the right thread thickness. For lightweight fabrics, use a finer thread, while heavier fabrics may require a thicker thread to ensure the hem holds up well.

4. Are there any tools or accessories I need for hemming pants by hand?

While hemming pants by hand doesn't require many tools, there are a few accessories that can make the process easier. These include:

  • A sharp pair of fabric scissors for cutting the excess fabric.
  • Pins or clips to hold the folded hem in place before sewing.
  • A measuring tape to measure the correct length for the new hem.
  • Needle and thread for sewing the hem.

Having these tools and accessories on hand will ensure a smooth and successful hemming process.

5. Can I hem pants by hand if I don't have any sewing experience?

Hemming pants by hand is a skill that can be learned, even if you don't have any sewing experience. With patience and practice, you can achieve a professional-looking hem. Start by following step-by-step tutorials or watching instructional videos to understand the process. Begin with simple projects and gradually work your way up to more complex ones. Learning basic hand sewing techniques and getting comfortable with the stitches will give you the confidence to hem pants by hand.

Remember to take your time, measure accurately, and practice on scrap fabric before hemming your pants. With persistence, you'll soon master the art of hemming pants by hand.



So there you have it, a step-by-step guide on how to hem pants by hand. It may seem like a daunting task at first, but with a little practice, you'll be able to hem your pants like a pro.

Remember to start by measuring and marking the desired length, then fold the fabric and secure it with pins. Use a needle and thread to stitch along the marked line, making sure to create even stitches. Finally, trim any excess fabric and press the hem for a polished finish.


RELATED ARTICLES