How To Measure Length Of A Shirt?

How To Measure Length Of A Shirt?

When it comes to measuring the length of a shirt, precision is key. Did you know that getting the right length can make all the difference in how a shirt fits and looks? Whether you're buying a new shirt or altering an existing one, knowing how to measure its length is essential for achieving the perfect fit. So, let's dive into the world of shirt measurements and discover the techniques that will ensure you always have a shirt that flatters your figure.

Measuring the length of a shirt involves a few key steps. Start by laying the shirt flat on a table or another smooth surface. Gently smooth out any wrinkles or creases to get an accurate measurement. Using a measuring tape, place one end at the base of the collar in the center of the back and extend it down to the desired length. This could be where you want the shirt to end at your waist, hips, or any other preferred length. Taking this measurement will provide you with the knowledge you need to find the perfect-fitting shirt or make alterations to an existing one. With accurate measurements, you can confidently shop for shirts online or have a tailor customize your shirts to your exact specifications.



How To Measure Length Of A Shirt?

Understanding the Length of a Shirt

When it comes to finding the perfect fit for a shirt, one of the most important measurements to consider is the length. The length of a shirt not only affects how it looks on the wearer but also contributes to overall comfort and style. Whether you are a seasoned fashionista or a novice when it comes to measuring garments, this guide will provide you with step-by-step instructions on how to accurately measure the length of a shirt, ensuring a well-fitted and flattering look.

Measure the Body Length

The body length of a shirt refers to the measurement from the highest point of the shoulder to the bottom hem of the shirt. To measure the body length accurately, follow these steps:

  • Start by laying the shirt on a flat surface, such as a table or an ironing board.
  • Smooth out any wrinkles or creases, ensuring that the shirt is lying flat.
  • Take a measuring tape and place the "0" point at the highest point of the shoulder, near the collar seam.
  • Extend the tape measure vertically and let it naturally fall straight down to the bottom hem of the shirt. Make sure the tape measure is parallel to the center back seam.
  • Read the measurement at the bottom hem of the shirt to determine the body length.

Keep in mind that the body length may vary depending on the style of the shirt. For example, a t-shirt may have a shorter body length compared to a dress shirt. It is essential to measure each shirt individually to ensure accurate results.

Tips for Accuracy

To achieve accurate measurements when measuring the body length of a shirt, consider the following tips:

  • Measure the shirt while it is laid flat on a surface for consistency.
  • Take the measurement twice to ensure accuracy, and compare the results.
  • If you don't have a measuring tape, use a regular ruler and convert the measurements into inches or centimeters.
  • For lightweight or sheer fabrics, use a fabric marker or safety pins to mark the measurement points.
  • Do not stretch or pull the shirt while measuring, as it may affect the accuracy of the measurement.

Measure the Sleeve Length

In addition to the body length, the sleeve length is also an important measurement to consider when it comes to shirts. The sleeve length refers to the measurement from the shoulder seam to the end of the sleeve, typically at the wrist bone. Follow these steps to measure the sleeve length:

  • Lay the shirt on a flat surface, ensuring that the sleeves are extended straight out.
  • If the shirt has a pleat or a gather at the shoulder seam, make sure it is smoothened out to get an accurate measurement.
  • Starting from the shoulder seam, measure along the outside of the sleeve until you reach the end of the cuff or sleeve.
  • Read the measurement at the end of the cuff or sleeve to determine the sleeve length.

Note that sleeve length can vary depending on the style of the shirt, such as long sleeves or short sleeves. It is important to measure each shirt individually to ensure the right fit.

Tips for Accuracy

To obtain accurate sleeve length measurements, consider the following tips:

  • Ensure that the sleeves are stretched out straight before measuring.
  • Take the measurements twice and compare the results for consistency.
  • If there are any cuff fastenings, unbutton or unfasten them before measuring.
  • For shirts with tapered or cuffed sleeves, measure from the shoulder seam to the end of the cuff, following the natural curve of the sleeve.
  • Be cautious not to include any excess fabric or allowances in the measurement, as it may affect the fit.

Measure the Back Length

In addition to the body length and sleeve length, measuring the back length of a shirt is also crucial for achieving a well-fitted look. The back length refers to the measurement from the neck base (the bony part at the back of your neck) to the bottom hem of the shirt. Follow these steps to measure the back length accurately:

  • Stand straight with your back against a wall or a vertical surface.
  • With the help of a mirror or a friend, locate the base of your neck, which is the bony part at the back, just below the hairline.
  • Place the "0" point of the measuring tape on the base of your neck and let it hang down vertically.
  • Extend the measuring tape down your back, following the natural curve of your spine, until you reach the desired length.
  • Read the measurement at the bottom hem of the shirt to determine the back length.

It is important to note that the back length can vary depending on the style of the shirt. For example, a t-shirt may have a shorter back length compared to a button-down shirt. Measure each shirt individually to ensure accurate results.

Tips for Accuracy

Here are some tips to help you measure the back length accurately:

  • Make sure you are standing up straight, with your shoulders relaxed and in a natural position.
  • If you have long hair, tie it up or secure it away from the neck area, allowing better access to the base of the neck.
  • Take the measurement twice to ensure accuracy and consistency.
  • If you find it challenging to locate the base of your neck, ask someone for assistance.
  • When measuring, ensure the tape measure is straight and not angled or slanted.

Measure the Front Length

While the body length and back length are vital measurements, the front length of a shirt is equally important. The front length refers to the measurement from the highest point of the shoulder to the bottom hem of the shirt at the front. To measure the front length accurately, follow these steps:

  • Lay the shirt flat on a surface with the front facing up.
  • Smooth out any creases or wrinkles to ensure accurate measurements.
  • Take a measuring tape and place the "0" point at the highest point of the shoulder, near the collar seam.
  • Let the tape measure hang vertically down the front of the shirt, ensuring it is parallel to the center front seam.
  • Read the measurement at the bottom hem of the shirt to determine the front length.

Similar to the other measurements, the front length can vary depending on the style of the shirt. Certain shirts may have a shorter front length compared to others. Measure each shirt individually for accurate results.

Tips for Accuracy

To ensure accuracy when measuring the front length, consider the following tips:

  • Place the shirt on a flat surface and smooth out any creases to achieve consistent measurements.
  • Measure the front length twice and compare the results for accuracy.
  • Do not stretch or pull the shirt while measuring, as it may affect the accuracy of the measurement.
  • Consider measuring multiple points along the center front seam to ensure accuracy, especially if the shirt has a curved or asymmetrical hem.
  • Keep in mind that variations may occur between different shirt styles, so it is crucial to measure each shirt individually.

Finding the Perfect Fit

Knowing how to measure the length of a shirt is essential for finding the perfect fit. By measuring the body length, sleeve length, back length, and front length accurately, you can determine the ideal size and style that will flatter your body shape and provide optimal comfort. Remember to follow the tips for accuracy and measure each shirt individually, as sizes can vary between brands and styles. Armed with these measurements, you can confidently shop for shirts online or have a tailor customize the fit for you, ensuring that every shirt you wear looks and feels great.


How To Measure Length Of A Shirt?

Measuring the Length of a Shirt

When it comes to measuring the length of a shirt, there are a few important steps to follow to ensure accuracy. Here's a professional guide on how to measure the length of a shirt:

1. Lay the shirt flat on a smooth surface, such as a table or the floor.

2. Place the measuring tape at the base of the collar, at the center back of the shirt.

3. Stretch the measuring tape straight down to the bottom hem of the shirt. Make sure it is parallel to the key reference points, such as the side seams.

4. Read the measurement in inches or centimeters at the point where the tape meets the bottom hem. This measurement represents the length of the shirt.

5. Repeat the process for the front and back of the shirt to ensure consistency.

By following these steps with precision, you can accurately measure the length of a shirt. This information is valuable for customers, tailors, and anyone looking to correctly determine the length of a shirt for various purposes.


Key Takeaways for "How To Measure Length Of A Shirt?"

  • Use a measuring tape to measure from the top of the shoulder down to the bottom hem.
  • Make sure the shirt is flat and not stretched when measuring its length.
  • Take the measurement from the back of the shirt for more accuracy.
  • Double-check your measurements to ensure accuracy.
  • Refer to the sizing chart provided by the brand to determine the correct length.

Frequently Asked Questions

Here are some common queries about measuring the length of a shirt:

1. How do I measure the length of a shirt?

To measure the length of a shirt, start from the base of the collar at the center-back and run the measuring tape straight down to the edge of the shirt's hem. Make sure to keep the tape parallel to the center-back seam for accurate measurement.

For a more precise measurement, have someone help you hold the end of the measuring tape at the base of the collar while you extend the tape to the hem. This will ensure accuracy and consistency in your measurements.

2. Should I measure the front or back of the shirt?

When measuring the length of a shirt, it is recommended to measure from the back. This is because the back of the shirt typically has a straighter and more consistent hemline compared to the front, which can have variations due to buttons, pockets, or other design elements.

However, if the front of the shirt has a noticeably different length compared to the back, you can measure both and take an average to get a more accurate overall length.

3. Should I include the collar in the measurement?

No, the collar should not be included when measuring the length of a shirt. Start measuring from the base of the collar at the center-back and continue down to the hem of the shirt. The collar is not considered part of the shirt's length measurement.

However, if you want to determine the total length of the shirt including the collar, you can measure from the collar's base to the hem of the shirt.

4. Should I measure while the shirt is worn or flat?

It is best to measure the length of a shirt while it is laying flat on a surface. This ensures that the shirt is not stretched or folded in any way that could affect the measurement.

When measuring a shirt that is worn, it may be difficult to get accurate measurements as the fabric can be manipulated and the fit may vary depending on body movements.

5. How do I properly read and record the measurement?

When measuring the length of a shirt, ensure that the measuring tape is straight and parallel to the center-back seam. Once you reach the edge of the shirt's hem, take note of the measurement in inches or centimeters.

It is recommended to record the measurement in both inches and centimeters for convenience, especially when referring to size charts or comparing measurements across different brands or regions.



In conclusion, measuring the length of a shirt is a straightforward process that anyone can do. By following these simple steps, you can ensure that you have the correct measurements for a shirt that fits well.

First, lay the shirt flat on a surface. Then, measure from the top of the shoulder to the bottom hem for the length. Remember to include any additional length that you prefer, such as tucking the shirt in or leaving it untucked.


RELATED ARTICLES